Free Domestic Shipping - - - Note: International Shipping Click on this banner to see our COVID Shipping Page

Wheelchair Bearings 608 ABEC-3 8x22x7mm
Wheelchair Bearings R8 1-1/8" OD x 1/2" ID x 5/16"
Wheelchair Bearings 6001-1/2 ABEC-1 28mm OD, 1/2" ID
wheelchair bearing  tool kit for ki mobility wheelchairs
wheelchair bearing  tool kit for ki mobility wheelchairs
wheelchair bearing  tool kit for ki mobility wheelchairs

Ki Mobility Wheelchair Bearings 608 R8 6001-1/2 6001-8 Front Casters, Forks, Caster Mounts, Rear Wheels

Wheelchair Bearings
Regular price
Sale price
Quantity must be 1 or more

These bearings are designed to work with most Ki Mobility wheelchair models including:


  1. Rogue
  2. Rogue XP
  3. Little Wave
  4. Little Wave Clik
  5. Tsunami


  1. Catalyst 5
  2. Catalyst 5 Ti
  3. Catalyst 5Vx
  4. Catalyst 4
  5. Spark


  1. Focus CR
  2. Little Wave Flip
  3. Liberty FT


  1. Rogue XP
  2. Little Wave
  3. Little Wave Clik
  4. Little Wave Flip
  5. Spark

Manufacturers suggest you service your wheelchair at least once a year. Your wheelchair, if not properly maintained will cause long-term damage to your body. Putting new bearings in your wheelchair and properly maintaining them is something you can do at home and will greatly reduce wear and tear on your body and allow you to go faster and roll farther.  We have developed a set of tools, found great bearings and show you how to do it.  More zoom less squeak.

High-Quality Bearings:

  1. Double lips seals for better water resistance
  2. High-Quality ABEC 5 ball bearings for better rolling
  3. High-Quality ABEC 3 Bearings used on 6001-1/2
  4. High-quality salt-water resistant synthetic grease


We use high-quality bearings made for the professional cycling industry. The bearings are designed to handle harsh environments and keep on working. 

What's Included:

Each of our Bearing Kits comes with:

  1. 4x high-quality bearings,
  2. 2x cotton swabs for cleaning and remove any old grease,
  3. 2x acetone wipes to clean hubs before re-greasing them,
  4. 1x high-quality grease packet to add a bearer between the bearing and the hub and
  5. a step by step instruction booklet to make sure you are on track. 

You can also contact us and we would be happy to answer any questions you have.

Trademarks are the property of their respective owners