Ki Mobility makes manual wheelchairs for adults and children.  They make rigid, folding and Tilt-In-Space wheelchairs.  Bearings can be found in the caster wheels, forks or caster mounts depending on the wheelchair design, in the frame for tilt-in-space wheelchairs and in the rear wheels.  Each section below will cover a bearing location on the wheelchair, any bearing options and any tools you may need. If you are not seeing what you are looking for or if you have any questions, please do not hesitate to contact us. 

Ki Mobility makes the following wheelchairs:

Rigid:

1. Rogue
2. Rogue XP
3. Little Wave
4. Little Wave Clik
5. Tsunami

Folding:

1. Catalyst 5
2. Catalyst 5 Ti
3. Catalyst 5Vx
4. Catalyst 4
5. Spark

Tilt-In-Space:

1. Focus CR
2. Little Wave Flip
3. Liberty FT

Pediatric:

1. Rogue XP
2. Little Wave
3. Little Wave Clik
4. Little Wave Flip
5. Spark

 

Ki Mobility Wheelchair Front Caster Bearings

These front casters are used across the Quickie and Zippie line of wheelchairs: 

1. Ki Mobility .75" Rollerblade Casters
2. Ki Mobility 1" Ploy Aluminum Caster
3. Ki Mobility 1" Pneumatic Caster
4. Ki Mobility 1.5" Poly Caster
5. Ki Mobility 1.5" Soft Roll Aluminum Caster
6. Ki Mobility 6 x 2" Poly Caster
7. Ki Mobility 1" Poly Caster

Ki Mobility Bearing Part number: N/A

Ki Mobility Wheelchair Fork Bearings

Ki Mobility uses 2 types of forks, those with bearings listed here and those where the bearings are in the frame or Caster Mounts listed in that section below.  Wheelchairs that use bearings fork bearings are as follows:

1. Ki Mobility Rogue XP Forks
2. Ki Mobility Clik Fork
3. Ki Mobility Unitime Fork

Ki Mobility Bearing Part number: 100902

To remove the fork bearings you will also need snap ring pliers. 

Ki Mobility Wheelchair Caster Mount Bearings

Ki Mobility uses two sizes of bearings in their Caster Mounts. Wheelchairs that use the first size bearing are as follows:

1. Ki Mobility Tsumani Caster Mount
2. Ki Mobility Catalyst Series Standard Caster Mount (image link here)

Ki Mobility Bearing Part number: 100530

Wheelchairs that use the second size bearing are as follows:

1. Ki Mobility Focus CR Caster Mount
2. Ki Mobility Catalyst Performance Caster Mounts (image link here)

Ki Mobility Bearing Part number: 100902

 

Ki Mobility Wheelchair Tilt-In-Space Bearings

Ki Mobility wheelchairs that use bearings in the tilt mechanism of the wheelchair is as follows:

1. Ki Mobility Focus CR

Ki Mobility Bearing Part number: 100902

Ki Mobility Wheelchair Rear Wheel Bearings

Ki Mobility uses two sizes of bearings in their rear wheels. Wheelchairs that use the first size bearing are as follows:

1. Ki Mobility Spoke Wheels 20", 22", 24"
2. Ki Mobility Mag Wheels 12", 16", 20", 22", 24"
3. Ki Mobility Spinergy Wheels All Models
4. Ki Mobility Superlight Wheel
5. Ki Mobility Topolino Rear Wheels
6. Ki Mobility 24" X-Core Mag Rear Wheels

Ki Mobility Bearing Part number: 100902

Other Tools

These are tools that you may want to consider if you are planning to do regular maintenance on your wheelchair.

Item	Description	Link	Add to Cart
Bearing Removal Stand	Used at kitchen table or living room floor	More Information
Work Mat	Portable work mat to keep grease off the carpet	More Information

Questions

If you are not seeing what you are looking for or if you have any questions, please do not hesitate to contact us.

Videos and instructions can be found in our Support Area.