Sunrise Medial makes manual Quickie wheelchairs for adults and Zippie wheelchairs for children.  They make rigid, folding and Tilt-In-Space wheelchairs.  Bearings can be found in the caster wheels, forks or caster mounts depending on the wheelchair design, in the frame for tilt-in-space wheelchairs and in the rear wheels.  Each section below will cover a bearing location on the wheelchair, any bearing options and any tools you may need. If you are not seeing what you are looking for or if you have any questions, please do not hesitate to contact us. 

Quickie / Zippie Wheelchair Front Caster Bearings

These front casters are used across the Quickie and Zippie line of wheelchairs: 

1. Quickie Micro Caster
2. Quickie 3 Spoke Caster
3. Quickie Soft Roll Caster
4. Quickie Aluminum Caster
5. Quickie Aluminum Soft Roll Caster
6. Quickie 8" x2" Caster

Sunrise Bearing Part number: 349502

 

Quickie / Zippie Wheelchair Fork Bearings

Sunrise uses 2 types of forks, those with bearings listed here and those where the bearings are in the frame or Caster Mounts listed in that section below.  Wheelchairs that use bearings fork bearings are as follows:

1. Quickie 7 Series
2. Quickie Q7 Series
3. Quickie 5R Quickie 2 Family
4. Zippie Zone

The types of Forks are listed here:

1. Quickie Standard Multiple Position Fork
2. Quickie Single Sided Multiple Position
3. Frog Leg Suspension Fork (12mm Stem)

Sunrise Bearing Part number: 349104

 

To remove the fork bearings you will also need snap ring pliers. 

Quickie / Zippie Wheelchair Caster Mount Bearings

Quickie / Zippie Wheelchairs that use caster mount bearings are as follows:

1. Quickie IRIS
2. Quickie SR45
3. Zippie Kidz
4. Zippie x'Cape
5. Zippie GS
6. Zippie 2
7. Zippie IRIS
8. Zippie TS

Sunrise Bearing Part number: 349500

 

Quickie / Zippie Wheelchair Tilt-In-Space Bearings

Quickie / Zippie Wheelchairs that use bearings in the tilt mechanism of the wheelchair is as follows:

1. Quickie IRIS Tilt
2. Zippie IRIS Tilt
3. Zippie TS

Sunrise Bearing Part number: 349500

 

Quickie / Zippie Wheelchair Rear Wheel Bearings

These rear wheels are used across the Quickie and Zippie line of wheelchairs: 

1. Quickie Mag Rear Wheels
2. Quickie Spoke Rear Wheels
3. Quickie Ultra Lite Spoke Rear Wheels
4. Quickie Mountain Rear Wheels 

Sunrise Bearing Part number: 349500

This rear wheel is also used across the Quickie and Zippie line of wheelchairs but uses a different bearing: 

1. Lite Spoke Wheel

Sunrise Bearing Part number: 114097

 

Other Tools

These are tools that you may want to consider if you are planning to do regular maintenance on your wheelchair.

Item	Description	Link	Add to Cart
Bearing Removal Stand	Used at kitchen table or living room floor	More Information
Work Mat	Portable work mat to keep grease off the carpet	More Information

Questions

If you are not seeing what you are looking for or if you have any questions, please do not hesitate to contact us.

Videos and instructions can be found in our Support Area.